Something that I’ve wanted to do for the past few years is to build a permanent bushcraft camp. For one reason or another, be it due to other plans or a lack of time, I never got around to it. The general idea was to create a long-lasting permanent camp, including a shelter, fire pit area, cooking facilities, storage/firewood area, crafting area and more using a minimum of tools and modern materials and getting most of what I need from the forest around me. Last weekend, I headed out to the country property I’ve been visiting so I could finally get started with the project. As it progresses, I hope not only to create a “woods home away from home”, but also to improve my skills and knowledge in the process!
First off, a picture of the site I picked for the camp. Nothing special, just a little opening surrounded mostly by spruces.
The most labor- and material-intensive structure at my new camp would be the shelter. I did a lot of thinking about just what kind of structure I wanted to build and ultimately decided on something that combines elements of several shelter types I’ve seen. Over the course of this series of posts, you’ll see what I came up with, but I won’t be divulging all my plans now.😉 For my shelter, I was going to need a good number of strong straight poles, so I was in luck that the forest nearby was in desperate need of thinning. It was so clogged with young spruce trees (some of which had already died due to a lack of sunlight) that it was difficult to walk through.
Now, as most of you know, I purchased a Swedish military surplus axe recently for work just like this, among other things. It was in such great condition that I didn’t have to do much more than scrub off the surface rust and marks from the handle. I spent about 1 minute with a sharpening stone getting it into shape and also impregnated the leather sheath with wax. Some before and after pics:
I was very eager to try this axe out in the woods. Of course, I brought my regular axe with me as well, because you never know how well a tool is going to perform (or fail) until you use it. As you can see, it was wet that day.
I decided to look for three solid poles on the thicker side to serve as a base tripod for my shelter, so I searched the area and felled them with my axe. I made sure to pick out trees which were being crowded out by or competing with other trees for sunlight. After just a few chops, I could detect a tiny bit of movement in the head. I decided to continue using the axe cautiously to see how things went. After being sunken in wet snow repeatedly, the handle absorbed some water and the head tightened right up. It didn’t budge in the slightest after that. I’ll be sure to soak it in linseed oil to rectify this situation properly. Here are the tripod poles I cut:
I don’t know what this particular type of lashing is called, but I have used it several times. First, you wrap the cord tightly around your poles four or five times and tie it off. Then, you tightly wrap the cord around itself between the poles several times and tie it off each time here as well. This gives you a solid tripod.
Following this, I spent several hours using the axe to fell and limb more spruce saplings and cut them to size. I was happy to find that the axe was not fatiguing to use one-handed for long periods of time, despite its overall weight of 1.6 kg (3.5 lbs). It bit deeply into the wood, was accurate and retained a sharp edge. It took very little for me to become accustomed to using the axe, as I’ve been using a 3/4 axe regularly for several years now. The main difference is the greater weight of the new axe, which I didn’t notice most of the time.
After the first round of trees had been processed, the shelter started to take shape:
I realized that the entire shelter project was going to take longer than I thought, and knowing it would get dark soon, I called it quits in order to look for firewood for cooking and heating that evening. I found a dead standing pine on a rocky hill nearby and felled it with the axe in no time. It had a base diameter of about 11 cm (4.25 inches), so nothing huge. I bucked it into three logs and carried them all back to my camp, where I cut them to length and split a few of them to get a fire going.
For kindling, I split some some of the smaller pieces of wood and made some feather sticks with the Marttiini Kaamosjätkä knife I modified years ago and showed here recently. I found that I enjoyed using a smaller knife like this for a change.🙂
By the end of the first day, I had made good headway on the shelter, procured myself some firewood and made myself a spruce-bough bed from all the limbs I had cut off the poles. The camp was starting to take shape.
Before I called it a day, I threw my new tarp on the pole frame, tied it down in a few places, and then put my sleeping bag and bivy on top of the bough bed. I didn’t even bother to get out my self-inflating sleeping pad, which I ended up not needing, as the spruce boughs provided plenty of insulation.
As the sun began to set and bathe the trees around me in a beautiful golden glow, I felt I had received some kind of reward for the day’s work, but it was only the first one. After nightfall, the clear sky provided a beautiful view of a bright moon and countless twinkling stars. The moon lit up the snowy forest so brightly that I didn’t need a headlamp or flashlight to see. I arose bright and early in the morning, looking forward to breakfast. First, though, I’d have to put together a rig to hang my pot from. I cut three suitable spruce poles to length and tied them together in a similar fashion to the shelter tripod, except that I only wrapped the cord around all three one time.
From the hinge, I hung a length of cord to hold a notched stick, which would in turn hold my cooking pot. Doing it this way keeps the cord from getting too close to the fire.
Although I had not done as much as I had hoped that weekend, I was pleased with what I had accomplished. The shelter was coming along nicely, and the cooking area was shaping up, too. Here’s the current status of my permanent bushcraft camp:
Before I went home, I stopped by the old farm house to take another look at the old knives I had found there, as I wanted to see if any of them were worth restoring. I was in luck! The vintage KJ Eriksson Mora knife, although a bit worn and rusty, was still very solid.
The following day, I spent my lunch break getting the knife into usable shape. Rather than completely refurbishing the knife and making it look like new, I decided to go a different route and let the vintage-ness of the knife come through. I scrubbed the blade and bolster with a plastic scouring pad and lemon juice to get the rust off and create a nice patina. Next, I scrubbed and then scraped the handle to remove as much of the red paint as possible. Finally, I slowly ran the handle over a candle flame several times to darken the wood and then soaked some wax into it to waterproof it. I’m pretty happy with the results and am planning on making a simple belt sheath for it after I procure some leather. By the way, I think this is the only Mora knife I’ve personally seen that has a leather washer between the handle and bolster. It’s a nice touch!
Hope you enjoyed this first look at my permanent camp!